Stallion KDP8 Submersible Pump

The pump is designed for mining and quarrying dewatering applications containing abrasive particles. The wear parts can easily be adjusted to maintain optimal efficiency in high wear applications. The major material of construction is aluminium and the pump can therefore easily be moved from one site to another.

  • Available as a high head (HH) and medium head (MH) version.
  • Maximum water temperature pumped = 40°C
  • Maximum density of liquid = 1100 kg/m 
  • Maximum depth in liquid pumped = 20m
  • Suitable PH range = 5-8 
  • Particles equal to the size of the strainer openings - 50mm x 6mm. 
  • NOT designed for explosive or flammable environments. 

Discharge Connection

HH = 75mm (3”)
MH = 100mm (4”)

Materials Of Construction:

  • Cast Parts: Aluminium, Grade LM 25 
  • Shaft: Stainless Steel, EN 57 
  • Impellers: Chrome Alloyed Cast Iron, Grade BS 4844 
  • Strainer: Galvanised Mild Steel 
  • Wear Parts: Rubber Lined (where appropriate) 
  • Mechanical Seals Faces: Tungsten Carbide

Motor Details:

  • Squirrel cage 3 phase 50 Hz AC Motor insulation class F 
  • Output 8kW at 2800Rpm. 
  • Available in 380V (16Amps) and 500V (12Amps).

Design Features:

1. Cooling
The outer casing encloses the motor section of the pump providing a continuous flow of cold water when the pump is working, enabling the pump to maintain long term operation without overheating.

2. Oil Casing
Oil lubricates the seals and acts as a buffer between the pumped media and the motor of the pump.

3. Bearings
The upper bearing consists of a single row ball bearing. The lower bearing consists of a double row angular contact ball bearing. The expected life of the bearings is at least 15000 hours of operation.

4. Mechanical Shaft Seals
The pump has two mechanical seals which operate independently of each other.

5. Wear Parts
The diffusers are easily adjusted in the field making it possible to maintain optimum pumping efficiency at minimal cost. Wear parts can easily be replaced once in situ adjustment is no longer possible.

Image
Image

Stallion KDP20 Submersible Pump

The pump is designed for mining and quarrying dewatering applications containing abrasive particles. The wear parts can easily be adjusted to maintain optimal efficiency in high wear applications. The major material of construction is aluminium and the pump can therefore easily be moved from one site to another.

  • Available as a high head (HH), medium head (MH) & low head (LH) version. 
  • Maximum water temperature pumped = 40°C 
  • Maximum density of liquid = 1100 kg/m 
  • Maximum depth in liquid pumped = 20m 
  • Suitable PH range = 5-8 
  • Particles equal to the size of the strainer openings - 50mm x 10mm. 
  • NOT designed for explosive or flammable environments.

Discharge Connection

HH = 100mm (4”)
MH = 150mm (6”)
LH = 150mm (6”)

Materials Of Construction:

  • Cast Parts: Aluminium, Grade LM 25 
  • Shaft: Stainless Steel, EN 57 
  • Impellers: Chrome Alloyed Cast Iron, Grade BS 4844 
  • Strainer: Galvanised Mild Steel
  • Wear Parts: Rubber Lined (where appropriate) 
  • Mechanical Seals Faces: Tungsten Carbide

Motor Details:

  • Squirrel cage 3 phase 50 Hz AC Motor insulation class F 
  • Output 20kW at 2900Rpm. 
  • Available in 380V (36Amps) and 500V (32Amps).

Design Features:

1. Cooling
The outer casing encloses the motor section of the pump providing a continuous flow of cold water when the pump is working, enabling the pump to maintain long term operation without overheating.

2. Oil Casing
Oil lubricates the seals and acts as a buffer between the pumped media and the motor of the pump.

3. Bearings
The upper bearing consists of a single row ball bearing. The lower bearing consists of a double row angular contact ball bearing. The expected life of the bearings is at least 15000 hours of operation.

4. Mechanical Shaft Seals
The pump has two mechanical seals which operate independently of each other.

5. Wear Parts
The diffusers are easily adjusted in the field making it possible to maintain optimum pumping efficiency at minimal cost. Wear parts can easily be replaced once in situ adjustment is no longer possible.

Image
Image

Legal Notice: OEM Brand names have been used for reference purposes only, and are not products or brands marketed by Kuplak Minerals Africa (Pty) Ltd.

FIND OUT MORE ABOUT OUR MINING SUPPLY SOLUTIONS